Animal Exchange Module or Animal Transfer Booth

Application: Research Centers and Vivariums, etc.

Module for exchanging mini-isolators, animals and handling biological or sterile materials; This equipment has the advantage of adjusting Positive or Negative pressure through dampers that make it possible to leave the working environment inside the cabin with positive or negative pressure, giving total protection to the animal, operator and environment or just protection to the animal with positive pressure in the cabin. workspace;
Air flow with 70% recirculation and 30% air exhaust, equipped with HEPA filter, G4 pre-filter and activated carbon pre-filter;

30% of the air is exhausted to the laboratory, this air is fully filtered by the hepa filter;

Equipment designed for class 100 work according to ABNT NBR 13.700, ISO CLASS 5 according to international standard ISO 14.644-1;

Equipment manufactured in marine aluminum sheet and electrostatic epoxy paint (or in AISI 304 stainless steel sheet);

Internal work area made of AISI 304 stainless steel with a brushed anti-reflective or polished super finish;

Removable work area facilitating cleaning and sanitization;

Insufflation: HEPA filter class H13 / H14 according to EN 1822 standard, with efficiency 99.95 to 99.995% for 0.3u particles, structure in extruded anodized aluminum or galvanized steel;

Exhaust: Pleated framed synthetic class G4 pre-filter, according to EN 779 (NBR 16101), activated carbon filter (odor reduction) and last filtration stage, HEPA filter class H13 / H14 according to EN 1822, with efficiency 99.97 a 99.995% for 0.3u particles, structure in extruded anodized aluminum or galvanized steel;

The work table is designed with height adjustment, allowing adjustment according to the user’s height (manual adjustment);
Double front access on both sides in polycarbonate or tempered glass, slider with vertical displacement and counterweight system which allows it to stop in any position of its course and with a 5º inclination that provides better ergonomics and the reduction of reflections for the user (enables that two operators work at the same time);
ON/OFF, ENGINE, L/COLD, L/UV and ALARM switches;

Audio visual safety device, when the front glass exceeds 200 mm, which is a safe opening for work;

Safety device used to activate the UV lamp, only with the glass completely closed;

Low noise level;

Air speed 0.45m/s +- 20%;

Power supply 220 V, 50/60 Hz; Double insulated power cable, with 2P + T plug;

220 V single-phase motor, with thermal protection and speed regulation;

Internal auxiliary socket;

Cold lamp with power variation depending on the model;

UV lamp with power variation depending on the model;

Equipment with base and lockable swivel casters;

SBIIA1TA: Biological safety cabinet for animal transfer, with two access windows for the work area, one front and one rear (double-sided).

Options:

Manometer for differential pressure measurement of the HEPA filter (Dwyer MinihelicII);

Alarm indicating saturation of the HEPA filter (Dwy'er);

Hour meter to count equipment and UV lamp hours;