Biological Safety Cabinet Class II B 1

Application: Analysis Laboratory, Hospitals, Microbiology, Research Centers and Industries in general, etc.

Class II type B1 with 30% recirculation and 70% air exhaust, equipped with two HEPA filters, one for supply and one for exhaust;

70% of the air is exhausted outside the laboratory through a duct system;

Class II type B1 cabins are suitable for working with agents that meet the Biosafety Level 3 criteria. They allow the use of biological agents treated with minute amounts of toxic chemical elements and traces of radionuclides, as long as the work is carried out in the posterior portion of the cabin. Care must be taken not to block the exhaust air outlet in the cabin work area.

The equipment is completely under negative pressure, preventing contaminated air from escaping into the laboratory;

Equipment designed for class 100 work according to ABNT NBR 13.700 and ISO CLASS 5 according to international standard ISO 14.644-1; Designed in accordance with the NSF-49 standard (USA);

Equipment made of naval aluminum sheet (superior to carbon steel) with anti-corrosion treatment and white electrostatic epoxy painting; (material does not undergo oxidation);

Internal work area made entirely of brushed AISI 304 stainless steel; Removable work table, facilitating cleaning and sanitation;

Arm support for better user ergonomics;

Absolute HEPA Filter (inflation and exhaust) H14 EN1822 – class A3 H14 NBR-6401, EU-13 Eurovent 4/4, with 99.995% efficiency for 0.3 micron particles and anodized aluminum frame;

G4 pleated pre filter;

Tempered front glass with vertical displacement, with a counterweight system allowing it to stop at any position in its course and with a 5° inclination, which provides better ergonomic comfort and reduced reflections for the operator;

Analog electrical control panel with drive: general, engine, L/cold, L/uv and Alarm;

Audio visual safety device, when the front glass exceeds 200 mm, which is a safe opening for work;

Safety device used to activate the UV lamp, only with the glass completely closed; Low noise level < 64 Db; Downflow air speed 0.31 to 0.45 m/s and inflow air speed > 0.51 m/s in accordance with qualification standards; Power supply 220 V, 50/60 Hz and protection fuses;

Power cable with double insulation and 2P + T plug; Sirocco type fan;

Electronic speed control 3 speeds;

Single-phase 1/3 hp motor with thermal protection and speed control;

01 internal 220 V auxiliary sockets;

01 valve for gas or vacuum;

01 cold LED lamp 9-15-18W; 01 UV lamp 15-30W with timer 1-60 min – with off. automatic lamp. UV in this range);

Equipment WITH base and lockable swivel casters;

Protection screen for the Hepa filter;

12 month warranty; National Origin; FILTERFLUX brand;

Aluminized flexible duct 2.5 m long and 250 mm in diameter and support for wall fixing (included).