Vertical Laminar Flow Module

Application: Testing or production in clean or sterile areas in the Pharmaceutical, Food, Electronics Industry, etc.

100% air renewal for the work environment;

Equipment designed for work area RN ISO 14.644-1 N° 5, class 100 according to ABNT NBR 13.700 and ISO CLASS 5;

Ideal for testing or production in clean or sterile areas;

This equipment keeps the work area fully protected;

Equipment manufactured in brushed or polished AISI 304 stainless steel sheet with a sanitary finish, or in naval aluminum sheet and electrostatic epoxy paint in white;

HEPA filter class H13 / H14 according to EN 1822, with efficiency 99.97 to 99.995% for particles 0.3 microns, structure in extruded anodized aluminum or galvanized steel;

Pleated framed synthetic class G4 pre-filter, in accordance with EN 779 (NBR 16101);

Sirocco fan with direct coupling to a two-phase or three-phase 220 V 50/60 Hz motor;

Speed regulation will be done through a frequency inverter, maintaining its performance throughout the saturation of the hepa filter;

Audible and visual alarm to alert the operator when the motor or inverter fails to operate;

Low noise level < 70 dB;

Air speed 0.45m/s +- 20%, with standard deviation ≤ 15% according to parameters required by the standard;

220 V, 50/60 Hz power supply, protected by compatible circuit breakers and fuses;

LED lamps varying in power according to the model;

On/off control via two keys, one for the motors and the other for the lamps;

Can be fixed to the ceiling, or on columns;

We manufacture to measure, dimensions in millimeters in the table below, or according to the customer’s needs.

Options:

Alarm indicating hepa filter saturation.
Manometer to indicate hepa filter pressure differential.